Industrial Division Facebook Twitter Google+  LinkedIn YoutubeYoutube  Home Medical Facebook

Engine Drives

Lincoln Electric Bulldog 5500

Spec Sheet

It’s great for homeowners and anyone who needs portable AC stick welding and AC generator power. 1-1/4 in. (32 mm) Diameter Rugged Tube Frame. Great for all-around sturdy protection.

Lincoln Electric Outback 145

Spec Sheet

1-1/4 in. (32 mm) Diameter Rugged Tube Frame. 4,750 Watts Peak (4,250 Watts Continuous) AC Generator Power.

Lincoln Electric Outback 185

Spec Sheet

Portable DC stick welding with AC generator power. All Engine Controls on Front Control Panel. 6.8 Gallon (25.7 Liter) Fuel Tank.

Miller Blue Star 145 DX and 185 DX

Build With Blue Spec Sheet

Reliable Blue Star engine drives are the standard for portable welder/generators.Large five-gallon fuel capacity leads its class. Longer run time for welder or generator usage. Optional running gear also makes the Blue Star one-man portable.

Miller Wildcat 200

Spec Sheet

Fully enclosed case provides a fully protected engine to ensure long-term reliability. Accu-Rated™ 6500-watts of useable peak power cranks out enough power for most applications: job site, farm/ranch, or home. 12 hours of run time is provided by a seven-gallon fuel tank when using a typical 1/8-inch stick electrode.

Lincoln Electric Pipeliner 200D

Spec Sheet

The Pipeliner® 200D is a direct descendant of Lincoln Electric’s industry-respected 200 amp pure DC generator welders for cross-country pipeline welding. It features a DC exciter and runs slower than the common 1800 RPM products, as requested by the most discriminating cross-country pipeline operators.

Lincoln Electric Ranger 225

Money Matters Spec Sheet

Totally Enclosed Case. Engine is fully protected. Three service access doors. Accu-Rated™ 6500-watts of useable peak power cranks out enough power for most applications: jobsite, farm/ranch, or home.

Lincoln Electric Ranger 250 GXT

Money Matters Spec Sheet

AC/DC welding output for a broad range of stick electrode types. Excellent AC TIG welding with optional TIG Module and either a foot or hand Amptrol™ for aluminum and other alloy welding. Totally Enclosed Case. Engine is fully protected. Three service access doors.

Miller Bobcat Series 225 and 250

Spec Sheet

Exclusive engine and generator packaging design operates cooler and more efficiently. Large 12-gallon fuel capacity means many hours of run time before refueling.

Miller Bobcat 250 Diesel

Spec Sheet

Versatile AC and DC Stick/TIG plus Wire capabilities provide quality welds on all types of metals. The addition of the Bobcat’s Tri-Cor™ Technology provides improved Stick arc performance with 7018 electrodes.

Miller Bobcat 3 Phase

Spec Sheet

Large 12-gallon fuel capacity means many hours of run time before refueling. With its intuitive design, the daily maintenance of our Bobcat welder/generators is faster and easier. Significant improvements in sound level and quality offer better job site communication, which provides a safer, more efficient working environment for you and your crew.

Miller Trailblazer 275 DC

Spec Sheet

Designed for the professional welder, our Trailblazer welder/generators deliver unbeatable arc performance in all weld processes, providing the smoothest, most stable arc in the industry. When you add optional engineered exclusives like Excel power and Electronic Fuel Injection (EFI), your new Trailblazer becomes more fuel-efficient, cost-effective and quieter than ever before

Lincoln Electric Classic 300D

Spec Sheet

Produces the welding arc preferred by pipeline operators and contractors for precise control of the arc in demanding code applications. Enhances arc stability for a really smooth, high performance arc. Kubota® model includes 150 RPM high idle OCV adjustment for enhanced fine tuning on pipe (see inside).

Lincoln Electric SAE-300

Spec Sheet

Kubota® model includes 150 RPM high idle OCV adjustment for enhanced fine tuning on pipe. Pipeline operators will enjoy welding with the arc produced from the rotating armature/field coil system manufactured for many years by Lincoln Electric. Arc stability, dependability and long-life are enhanced with all-copper windings.

Miller Trailblazer 302 and 302 Diesel

Spec Sheet

Protective armor with covers has high-impact resistance in all temperatures and is chemical resistant. Generator power is independent of weld.

Miller Trailblazer 302 Air Pak

Spec Sheet

The all-in-one tool that delivers multiprocess output for welding, plasma cutting, gouging, air tools, and 12/24-volt battery charger/jump starter. Takes only half the bed space of a separate engine-driven air compressor and welder, freeing up to 50 percent more room on your truck for equipment and supplies.

Lincoln Electric Ranger 305 G

Spec Sheet

The Ranger® 305 G is a powerful multiprocess stick, TIG, wire and pipe welding engine-driven welder that is ready for all day, everyday performance. Digital weld meters for amps and volts makes it easy to precisely pre-set your procedures and monitor actual welding output.

Lincoln Electric Ranger 305 LPG

Spec Sheet

Excellent DC multi-process welding for general purpose stick, downhill pipe (stick), TIG, cored-wire, MIG (CO2 and mixed gas) and arc gouging. Lincoln Electric Chopper Technology – provides easy starts, a smooth arc, low spatter and excellent bead appearance.

Lincoln Electric Ranger 305 D

Spec Sheet

10,000 Watts Peak Single-Phase AC Generator Power.10,000 watts peak for motor starting. 9,500 watts continuous for high capacity needs such as a back-up generator, powering a Lincoln Electric Invertec® inverter welder. Also use for lights, a grinder or other power tools. Skewed rotor design provides AC power suitable for operating Lincoln Electric inverter power sources.

Miller Trailblazer 325

Build With BlueSpec Sheet

Delivers unbeatable arc performance providing the smoothest, most stable arc in the industry. The Trailblazer exclusive Auto-Speed™ technology delivers superior runtimes, increased fuel efficiency, and improved welder/generator performance.

Miller Big Blue 350 PipePro System

Spec Sheet

Infinite arc control allows the arc characteristics to be changed for specific applications in Stick and MIG. Auto Remote Sense™ (ARS) detects if a remote control is plugged into the 14-pin receptacle and eliminates confusion of a remote/panel switch. Thermal overload protection prevents machine damage if the duty cycle is exceeded or airflow is blocked.

Miller Big Blue 400 Pro

Spec Sheet

Heavy-Duty Low-Speed Industrial Engines Designed to operate over 10,000 hours before the first basic overhaul. Backed by worldwide support and service.

Miller Big Blue 400 Eco Pro

Spec Sheet

An Eco-nomical and Eco-friendly alternative. Designed to be up to 25% more fuel-efficient during typical welding operations than other models. Output of the engine matches the power required, saving operating cost and the environment. The fuel savings really add up when running day-after-day, while producing fewer carbon emissions. Meets tough EPA Tier 4i compliance standards.

Miller Big Blue Air Pak

Spec Sheet

Welder/generator/air compressor. One machine that will do it all. Designed and built to be the most reliable highout put system in the world. Independent compressor controls. On/off switch for applications not requiring compressed air. At idle speed will produce 100 PSI at 40 CFM. Weatherproof Lexan® nameplate resists cracking and fading, and is color-coded for ease of operation.

Lincoln Electric Vantage 500

Spec Sheet

This multi-process powerhouse features standard stainless steel roof and side panels, simple controls and Chopper Technology® to deliver the low maintenance, long service life, easy operation and great arc performance every owner appreciates.

Lincoln Electric Air Vantage 500

Spec Sheet

VMAC® brand rotary screw air compressor rated at 60 CFM, 100 PSI, 100% duty cycle, delivers abundant air for arc gouging with up to 3/8 in. (9.5 mm) carbons, plasma cutting and air tools such as an impact gun. Select one of five process modes, including CC-stick, downhill pipe (for stick), DC Touch Start TIG®, CV-wire or new arc gouging mode which maximizes output with up to 3/8 in. (9.5 mm) carbon rods.