Industrial Division Facebook Twitter Google+  LinkedIn YoutubeYoutube  Home Medical Facebook

Pure Gases

OE Meyer Co. offers a wide-range of pure medical gases in high pressure cylinders.  All gases meet or exceed U.S.P. and N.F. requirements and are produced in accordance with OE Meyer Co.’s high quality standards. OE Meyer Co. internal audits and FDA inspections ensure ongoing medical standards are practiced.

 

O2 Tanks

General characteristics: A colorless, nonflammable, and odorless gas
Health hazards: None listed
TLV/TWA: None established
Flammable limits: A strong oxidizer
Molecular weight: 32.00
CGA valve outlet: 540/870* (Pin indexed*)
DOT class: 2.2 (Nonflammable Gas)
DOT label: Nonflammable Gas, oxidizer
Specific volume: 12.1ft3/lb. at 70°F
Specific gravity (Air = 1): 1.105 at 77°F
Material recommendation: Copper, brass, nickel alloys, steel, and stainless steel. All equipment must be cleaned for oxygen service.
CAS No. 7782-44-7
UN No. 1072
Federal law prohibits dispensing without prescription
General characteristics: A colorless, nonflammable and odorless gas. Produced synthetically
from Nitrogen NF and Oxygen USP.
Health hazards: Non hazardous at atmospheric pressure.
Flammable limits: Not applicable
Molecular weight: 28.98
CGA valve outlet: 346/950* (Pin indexed*)
DOT class: 2.2 (Nonflammable Gas)
DOT label: Nonflammable Gas
Specific volume: 13.3 ft3/lb. at 70°F
Specific gravity
(Air = 1): 1.0 at 70°F
Material recommendation: Most common materials can be used
UN No. 1002
Federal law prohibits dispensing without prescription
General characteristics: A colorless, nonflammable, odorless, sweet tasting, anesthetic, liquefied gas
Health hazards: A simple asphyxiant and an anesthetic, a mild oxidizer
TLV/TWA: None established (ACGIH 1996)
Flammable limits: Nonflammable
Molecular weight: 44.00
CGA valve outlet: 326/910* (Pin indexed*)
DOT class: 2.2 (Nonflammable Gas)
DOT label: Nonflammable Gas
Specific volume: 8.7 ft3 at 70°F
Specific gravity (Air = 1): 1.53 at 68°F
Material recommendation: Normal materials can be used. All equipment must be cleaned for oxygen service.
CAS No. 10024-97-2
UN No. 1070
Federal law prohibits dispensing without prescription
General characteristics: A colorless, nonflammable, liquefied odorless gas
Health hazards: In high concentrations can paralyze the respiratory center
TLV-TWA: 5000 ppm (ACGIH 1996)
Flammable limits: Nonflammable
Molecular weight: 44.00
CGA valve outlet: 320/940* (Pin indexed*)
DOT class: 2.2 (Nonflammable Gas)
DOT label: Nonflammable Gas
Specific volume: 8.74 ft3/lb. at 70°F
Specific gravity (Air = 1): 1.522 at 70°F
Material recommendation: Normal materials can be used for dry gas
CAS No. 124-38-9
UN No. 1013
Federal law prohibits dispensing without prescription
General characteristics: A colorless, nonflammable, and odorless gas
Health hazards: A simple asphyxiant
TLV-TWA: None established
Flammable limits: Nonflammable
Molecular weight: 4.00
CGA valve outlet: 580/930* (Pin indexed*)
DOT class: 2.2 (Nonflammable Gas)
DOT label: Nonflammable Gas
Specific volume: 96.7 ft3/lb. at 70°F
Specific gravity (Air = 1): 0.138 at 70°F
Material recommendation: Normal materials can be used
CAS No. 7440-59-7
UN No. 1046
Federal law prohibits dispensing without prescription
General characteristics: A colorless, nonflammable, odorless gas
Health hazards: A simple asphyxiant
TLV/TWA: None established
Flammable limits: Nonflammable
Molecular weight: 28.00
CGA valve outlet: 580/960* (Pin indexed*)
DOT class: 2.2 (Nonflammable Gas)
DOT label: Nonflammable Gas
Specific volume: 13.8 ft3 at 70°F
Specific gravity (Air = 1): 0.967 at 70°F
Material recommendation: Normal materials can be used
CAS No. 7727-37-9
UN No. 1066
Federal law prohibits dispensing without prescription

Pure medical drug gases may be hazardous or contraindicated and should be used only by or under the supervision of a licensed practitioner, who is experienced in the use and administration of the product.